Anybus Wireless Bolt Reference Guide

AT Commands 51 (88)
3.8.3 AT*AMPW Password
AT*AMPW=
Set password to the AT command interface
Syntax:
AT*AMPW=<password>,<store>
Input Parameters:
Name
Type Description
password String Max length is 16 characters
store Boolean If store is 1 the new value is stored permanently.
3.8.4 AT*AMSTAT System status
Get the system status.
AT*AMSTAT=
Get the system status.
Syntax:
AT*AMSTAT=<verbose>
Input Parameters:
Name
Type Description
verbose Boolean 0: Terse, 1: Verbose.
Example:
AT*AMSTAT=0<br>*AMSTAT: Uptime:25<br><br>*AMSTAT: WLAN Mode:Station,
MAC:02:01:2E:00:24:00, state:3<br>*AMSTAT: Connected to
AP:02:01:2E:00:28:00, channel:1, rssi:-35<br><br>*AMSTAT: Bluetooth:
MAC:8C:8B:83:EE:2A:E6, State:1<br>*AMSTAT: Local name:
dut<br><br>*AMSTAT: Ethernet: MAC:02:00:2E:00:24:00, State:1,
Type:1<br>*AMSTAT: IP_ADDR:192.168.0.99<br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English