Anybus Wireless Bolt Reference Guide

AT Commands 56 (88)
3.8.13 AT*AMTL TCP Listener
Configures the AT over TCP server
AT*AMTL=
Set TCP listener settings
Syntax:
AT*AMTL=<port>,<enable>,<store>
Input Parameters:
Name
Type Description
port Integer TCP port to listen for incoming connections
enable Boolean 0: Disables TCP Listener
1: Enables TCP Listener
store
Boolean If store is 1 the new value is stored permanently.
Requires a reboot for the changes to take effect.
AT*AMTL?
Get TCP listener settings
Syntax:
AT*AMTL?
Example:
AT*AMTL?<br>*AMTL:<port>,<enabled>
3.8.14 AT*AMBD Bridging Disable
AT*AMBD=
Set bridging enable/disable
Syntax:
AT*AMBD=<disable>,<store>
Input Parameters:
Name
Type Description
disable Boolean 0: Bridging Enabled
1: Bridging Disabled
store Boolean If store is 1 the new value is stored permanently.
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English