Anybus Wireless Bolt - Page 64

AT Commands 62 (88)
3.9.3 AT*BLEOM Get/Set the BLE operating mode
AT*BLEOM=
Set the BLE operating mode.
Syntax:
AT*BLEOM=<mode>,<store>
Input Parameters:
Name
Type Description
mode Integer The BLE operating mode:
0: BLE off.
1: Central operating mode.
store Boolean If store is 1 the new value is stored permanently.
Requires a reboot for the changes to take effect.
Example:
AT*BLEOM=1,1<br>OK
AT*BLEOM?
Get the current BLE operating mode.
Syntax:
AT*BLEOM?
Example:
AT*BLEOM?<br>*BLEOM:<mode><br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7