Anybus Wireless Bolt Reference Guide

AT Commands 63 (88)
3.9.4 AT*BLEND BLE name discovery
AT*BLEND=
Discover the name of a Bluetooth device.
Syntax:
AT*BLEND=<bd_addr>
Input Parameters:
Name
Type Description
bd_addr String Bluetooth address of the device, on the format "XX-XX-XX-XX-XX-
XXy" where "y" is "p" or "r" depending on if the address is private or
random.
Output Parameters:
Name
Type Description
devicename String Devicename of found BLE device. The value is limited to a
maximum of 19 bytes.
Example:
AT*BLEND=<bd_addr><br>*BLEND:<devicename><br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English