Anybus Wireless Bolt

AT Commands 74 (88)
3.10.6 AT*BGCRC Read Characteristic Value, Read Characteristic
Descriptors
Note: Only available when the device is in central operating mode.
AT*BGCRC=
Read the value of a characteristic or descriptor.
Syntax:
AT*BGCRC=<con_handle>,<attr_handle>,<offset>
Input Parameters:
Name
Type Description
con_handle Integer Connection handle.
attr_handle Integer Handle to the characteristic or descriptor value.
offset Integer Offset where to start read from.
Output Parameters:
Name
Type Description
data String Data formatted as a hexadecimal string.
Example:
AT*BGCRC=<con_handle>,<attr_handle>,<offset><br>*BGCRC:<data><br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7