Anybus Wireless Bolt Reference Guide

AT Commands 75 (88)
3.10.7 AT*BGCRCU Read Using Characteristic UUID
Note: Only available when the device is in central operating mode.
AT*BGCRCU=
Read the value of a characteristic by UUID. ERROR will be returned if no characteristic with the
specified UUID could be found in the handle range.
Syntax:
AT*BGCRCU=<con_handle>,<start_handle>,<end_handle>,<uuid>
Input Parameters:
Name
Type Description
con_handle Integer Connection handle.
start_handle Integer Handle, where to start looking for the UUID.
end_handle Integer Handle, where to stop looking for the UUID.
uuid String UUID to look for.
Output Parameters:
Name
Type Description
attr_handle Integer Handle to the attribute read.
data String Data formatted as a hexadecimal string.
Example:
AT*BGCRCU=<con_handle>,<start_handle>,<end_handle>,<uuid><br>*BGCRCU:
<attr_handle>,<data><br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English