Need help?Do you have a question about the AnyCubic Kobra and is the answer not in the manual?
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Layer Resolution | 0.05-0.3 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | MicroSD card, USB |
| Leveling | Automatic |
| Technology | FDM (Fused Deposition Modeling) |
| Bed Temperature | up to 110°C |
| Nozzle Temperature | up to 260°C |
| Frame Material | Metal |
| Power Supply | 350W |
| Machine Weight | 7 kg |
| Printing Speed | up to 180 mm/s |
| Supported Materials | PLA, ABS, TPU, PETG |
| Display | 4.3-inch Color Touchscreen |
To Next Page
