MHPTV TX Quick Start Guide
MHPTV-QSG-DOC-V1.1, 12/05/2018 Page 9 of 37
5 TX Interconnect Diagram
Below is the front view of the Anywave 3-PA MHPTV Transmitter - which comes
in single and dual exciter configurations. Photos of a single exciter system are shown
below. The main subsystems (as seen from the front) include Exciter(s), one Controller
(with a touchscreen LCD, and built-in preamp), three power amplifiers (8 x BLF 888E
power transistors per PA), one AC Mains Breaker, and one channel mask Band Pass
Filter (BPF) – optional – installed on top or on the side of the cabinet rack.
Exciter
Controller
PA 3
PA 2
PA 1
AC Mains
Breaker
To Next Page
Loading...