AOC CU34P2A - OSD Menu Navigation

12
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup ExitExtra
Contrast 50
Brightness 90
Eco mode Standard
Gamma Gamma1
DCR Off
HDR Mode Off
PIP Setting
PIP
Game Setting
1. Press the
MENU-button
to activate the OSD window.
2. Press
Left
or
Right
to navigate through the functions. Once the desired function is highlighted, press the
MENU-button
to activate it, press
Left
or
Right
to navigate through the sub-menu functions. Once the desired
function is highlighted, press
MENU-button
to activate it.
3. Press
Left
or to change the settings of the selected function. Press to exit. If you want to adjust any other
function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the
MENU-button
while the monitor is o󰀨 and then press
power
button to turn the monitor on. To un-lock the OSD - press and hold the
MENU-button
while the monitor
is o󰀨 and then press
power
button to turn the monitor on.
Notes:
1. If the product has only one signal input, the item of “Input Select” is disable to adjust.
2. If the product screen size is 4:3 or input signal resolution is native resolution, the item of “Image Ratio” is disabled.
3. One of DCR, Color Boost and Picture Boost functions is activated, the other two function s are turned o󰀨 accordingly.