18
OSD Setup
ExitExtra
Luminance
Color Setup
H. Position 50
V. Position 0
Transparence 25
Language English
Timeout 10
Break Reminder Off
OSD Setup
Picture Boost
DP Capability 1.1
USB
PIP Setting
PIP
Game Setting
2.0
USB Selection Auto
Language Select the OSD language
Timeout 5-120 Adjust the OSD Timeout
DP Capability 1.1 / 1.2
If the DP video content supports DP 1.2, please
seclect DP1.2 for DP Capability , otherwise,
please select DP1.1.
Please be noted that only DP1.2 support Adaptive-
Sync function
H. Position 0-100 Adjust the horizontal position of OSD
V. Position 0-100 Adjust the vertical position of OSD
USB* 3.2Gen1 / 2.0 / O
For model need to turn on/o USB power during
power saving.
Transparence 0-100 Adjust the transparence of OSD
Break
Reminder
On / O
Break reminder if the user continuously work for
more than 1hrs
USB Selection Auto / USB C / USB up
*AUTO: Switch with display input source
*USB C/USB up: Fix up stream not change with
input source.
Notes:
*USB C(DP Alt) signal input, and “USB” is set to “2.0”, the maximum resolution is 3440x1440@100Hz
.
To Next Page
Loading...
Need help?
General
