Screen position adjustment
To optimize the viewing position, you can adjust the
monitor tilt, using both of your hands to hold the edges
of the monitor.The screen can be adjust by inclining
with both hands to optimize the view as shown below.
Generally, it can be adjusted up to 15 degrees backward
and up to 5 degrees forward.
Power saving
The monitor will be switched to “power saving” mode by the control signal from the
The power-saving state is maintained until the control signal is detected or the keyboard
or mouse is used. It takes about 3-4 seconds to recover from the active “sleep” mode to
“power on”.
Connect power adapter (power cord)
The power adapter (power cord) applies universal power supply. AC 100-240v50/60Hz
voltage range is applicable without user adjustment.
display controller, as indicated by the white light.
Mode LED light
On Lighting
flickerStandby/Power saving
3
English
-5° 15°
LED INDICATOR
To Next Page
Loading...
Need help?
General
