iii
English
Special notes on LCD monitors
The following are normal with the LCD monitor and do not indicate a problem.
use. Turn off the power switch and then turn it on again to make sure the flicker
disappears.
pattern you use.
remain after switching the image, when the same image is displayed for hours. In this
case, the screen is recovered slowly by changing the image or turning off the power
switch for a few hours.
Cleaning your monitor
Please carefully follow these guidelines when cleaning the monitor:
Information for your safety and
comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference. Follow all
warnings and instructions marked on the product.
Connecting/disconnecting the device
Observe the following guidelines when connecting and disconnecting power from the
LCD monitor:
• Make sure the monitor is attached to its base before connecting the power cord to
the AC power outlet.
• Make sure both the LCD monitor and the computer are turned off before
connecting any cable or unplugging the power cord.
• If the system has multiple sources of power, disconnect power from the system by
unplugging all power cords from the power supplies.