13
English
OSD
System
Series Number
PPPPPPPPPP012345678912
Exit
Save Setting to...(User mode only)
Troubleshooting
Before sending your LCD monitor for servicing, please check the troubleshooting list
Save the settings to sRGB/reading/darkroom mode.
HDMI Mode (Optional)
Problem LED status Remedy
No picture visible Using the OSD menu, adjust brightness and
contrast to maximum or reset to their default
settings.
Check the power switch.
Check if the power cord is properly connected
to the monitor.
Check if the video signal cable is properly
connected at the back of monitor.
Check if the computer system is switched on
and in power saving/standby mode.
Remain on
Light off
flicker
To Next Page
Loading...
Need help?
General
