AP systems ECU-R - 2.5 RJ45 Ethernet Network Port; 2.6 RJ45 Signal (Only for Australia); 2.7 Antenna; 2.8 LED1

ECU-R Installation/User Manual
5
2. Interface Explanation
2.5 RJ45 Ethernet Network Port
The ECU-R allows the user to communicate with the EMA.
2.6 RJ45 Signal（Only for Australia）
The RJ45 Signal is designed for DRM0, it should be connected by RJ45 connector
in the package otherwise the inverter will not work.
2.7 Antenna
The antenna in the package should be connected to ECU-R.
Figure 3
2.8 LED1
LED1 will be on When the ECU-R works well.
2.9 LED2
LED2 will be on When the ECU-R connects to the sever.
LED1
LED2