Apache Matto E7 User Manual

Item Display Setting
Unit - units setting (km/miles)
Brightness - background light intensity setting (10, 30, 50, 75 or 100 %)
Auto Off - automatic shutdown setting (1-9 min)
Max Pas - number of assistance leves (3/5/9)
Power View - setting of performance indicator format (performance/torque moment)
SOC View - setting of battery indicator format (percentage/voltage)
TRIP reset - temporary data deleting (TRIP, MAX, AVG, TIME)
Wheel - setting of the wheel diameter in inches
Speed Limit - speed limit setting (10-25 km/h)
AL Sensitivity - light sensitivity setting (0 - 5, 0 = luminosity sensor off)
Password - activation, change and user password deactivation
Set Clock - time setting
Back - back
Information item
Battery info - total information on battery status and battery properties
Error Code - summary information on occurred error reports (max. 10 items)
Back - back
LCD COMPACT - EBIKE CONTROL
assistence level
speed / distance mode
speed units
lights
speed
power scale
battery status
Error codes
Code Problem cause
07 Protection from battery overvoltage (check the battery voltage).
08 Error of motor hall sensor (check the settings and connections with the motor).
09 Error of motor phase cable (check the settings and connections with the motor).
11 Error of unit control temperature sensor (check the settings and connections with the control unit).
12 Error of torque moment sensor (check the settings and connections with the motor).
13 Overheated battery (switch off the system and wait).
14 Overheated motor (switch off the system and wait).
21 Error of speed sensor (check the settings and connections with the motor).
22 Error of BMS interface (replace the battery).
30 Communication error (check connections of all connectors).
Should any of these errors remain or another error than defined appears contact your dealer.
(Matto E7, Matto E7 Lady, Gaagii, Gaagii Lady)
Switching on - off
Switch on the electric system supply to the battery
Activate the battery by pressing the button on its body.
Switch on the LCD panel of eBike
Press the button and hold it for period of 2 seconds.
Use the same method to switch off the electric system. To switch off the frame battery press the button for
period of 4 seconds. Due to energy saving switches the system off automatically after 10 minutes of inactivity.
1
2
9

Apache Matto E7 Specifications

General

Brand	Apache
Model	Matto E7
Category	Scooter
Language	English