APC Back-UPS Pro 1000 User Manual

Back-UPS
®
Pro 1000 Installation and
Operation
Connect the battery
Install PowerChute
®
Personal Edition Software
APC PowerChute Personal Edition software provides automatic file saving and shutdown of
your computer in the event of a power failure. Use the cable supplied with the Back-UPS to
connect the data port on the Back-UPS to the USB port on your computer. Place the CD into
your computer, and follow the on-screen instructions.
Inventory Safety
Do not install the Back-UPS in direct
sunlight, in excessive heat,
humidity, or in contact with fluids.


bu001b
bu055a
bu057a
bu059a
bu058a
bu060a

APC Back-UPS Pro 1000 Specifications

General

Output Power Capacity	600 Watts / 1000 VA
Nominal Input Voltage	120V
Input Connections	NEMA 5-15P
Cord Length	1.83 meters
Waveform Type	Stepped approximation to a sinewave
Interface Port(s)	USB
Battery Type	Lead-acid battery
Typical Recharge Time	8 hours
Input Frequency	50/60 Hz (auto-sensing)
Audible Alarm	Alarm when on battery, distinctive low battery alarm
Dimensions (H x W x D)	250 x 100 x 382 mm
Warranty	3 years
Output Connections	(6) NEMA 5-15R (Battery Backup)
Net Weight	10.72 kg