Need help?Do you have a question about the APC MGE Galaxy 3500 Series and is the answer not in the manual?
Instructions on how to find the latest version of the manual on the APC website.
Description of the UPS display and navigation keys for operation.
Details the different operational modes of the UPS system, including Normal and Bypass.
Procedure to switch the UPS to internal bypass operation for maintenance.
Procedure to return the UPS from internal bypass back to normal operation.
Step-by-step instructions to completely shut down the UPS and its load.
Procedure to restart the UPS system after a power off.
Procedure to switch the UPS to external maintenance bypass mode.
Procedure to return the UPS from external bypass to normal operation.
Steps to completely shut down the UPS and its load when using an external bypass panel.
Procedure to restart the UPS system after a total power off, when using an external bypass.
Procedure to place UPS units in external maintenance bypass in a parallel configuration.
Procedure to return UPS units from external maintenance bypass to normal operation.
Steps to restart UPS units in a parallel system.
Procedure for a total power off of UPS units in a parallel system.
Instructions to safely isolate a single UPS unit from a parallel system.
Procedure to bring an isolated UPS unit back into normal operation in a parallel system.
Procedure to turn load on/off via the display interface and disconnect/connect to equipment.
Accessing status screens, logs, statistics, and diagnostic information.
Accessing system settings for clock, alarms, and dust filter.
Procedure to change the date, time, and time-stamps in the UPS event log.
Instructions for managing and resetting the dust filter surveillance settings.
Information on setting and understanding alarm thresholds for UPS parameters.
Guide to configuring beeper settings, display contrast, and language.
Procedure for identifying and ordering replacement parts for the UPS.
Step-by-step guide to safely remove the front panel of the UPS unit.
Instructions for correctly reinstalling the front panel onto the UPS unit.
Guidelines for inspecting the dust filters for contamination and replacement needs.
Detailed procedure for replacing the dust filters in the UPS system.
Recommendations for storing battery modules and the UPS system properly.
Guidelines for storing dust filters under appropriate environmental conditions.
Procedure for replacing the Network Management Card in the UPS front panel.
List and explanation of UPS status and alarm messages with corrective actions.
Detailed list of UPS display messages, their meanings, and recommended corrective actions.
General| Topology | Double Conversion Online |
|---|---|
| Transfer Time | 0 ms |
| Form Factor | Tower |
| Output Frequency | 50/60 Hz |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Humidity | 0 to 95% non-condensing |
| Battery Type | Valve-Regulated Lead Acid (VRLA) |
To Next Page