APC PX - SmartSlot Interface Accessories

Chapter 5 - System Setup
Note: The PowerView can be configured to display English,
Spanish, German, French or Italian text. See chapter 6.
SmartSlotSmartSlot
SmartSlotSmartSlot
SmartSlot
TMTM
TMTM
TM
Interface Accessories Interface Accessories
Interface Accessories Interface Accessories
Interface Accessories
SmartSlot
TM
bays at the rear of the frame accommodate up to
four accessory cards. SmartSlot
TM
cards are available through
the dealer.
Note: APC offers a line of SmartSlot
TM
Accessories that are de-
signed specifically to function with Symmetra
TM
. Before install-
ing any SmartSlot
TM
accessory, make sure it is a Symmetra
TM
Compatible model.
n Share-UPS
TM
SmartSlot
TM
Accessory Card - Provides
automatic shutdown of up to two additional servers that
are connected to the Power Array.
Fig 5-14 PowerView Wall Mounting Template
n PowerNet
TM
SNMP SmartSlot
TM
Accessory Card - Pro-
vides network UPS management.
n Measure-UPS
TM
II SmartSlot
TM
Accessory Card - Works
in conjuction with PowerNet SNMP and PowerChute
Plus software. Provides environmental information such
as ambient temperature and humidity.
Note: If installing more than one accessory card, always
install the Measure-UPS card in the slot that is all the way
to the right. (Slot #1.)
n Call-UPS
TM
SmartSlot
TM
Accessory Card - Works with
an external modem to provide out-of-band UPS man-
agement for the Power Array.
See the User's Manual included with the SmartSlot
TM
Acces-
sory card for specific installation and operating instructions.
5-6
8cm (3 1/8")
9cm (3 1/2")
10.3cm (4")