paired to the specific fixtures (see "More Functions and
Updates" below for Pairing). For use with the W-Ape (and
DMX controller), each fixture can be assigned to a
DMX-512 address. Be default, the device is set to DMX
address one, but it can be assigned to any address when it is
turned on by going into Set-Up mode on the W-Ape.
› The device has a built-in microphone. It can be activated by
the remote control to create sound active effects.
Mounting
The ApeStick4 has two magnetic feet with an extremely high
holding force. The tube can be attached quickly to metallic
objects.
Use the enclosed metal sheets, if you want to mount the
ApeStick4 on a non-magnetic object.
The position of the magnetic feet can be varied individually. Turn
the foot by about 1 turn counterclockwise to untighten it. To
secure it, rotate the magnetic foot clockwise again.
To Next Page
Loading...