o
8C: 8 channels: Red, Green, Blue, White (each is 2-
DMX channels/16 Bit: coarse + fine)
More Functions and Updates
Disabling of the Battery Status Indicator
The red/green glowing indicator of the battery level can be
disabled. Instructions can be found at www.apelabsusa.com.
Pairing
Ape Labs lights and ApeRemotes can be paired permanently to
one another so that they will no longer synchronize with non-
paired devices. Pair as many lights to one remote as you would
like. This will allow users to create up to four groups on one
remote and up to 4 more groups on each additional remote that
is being used in the same room at the same time.
Intructions on How to Pair an ApeRemote with a Fixture:
› Step 1: Remove battery from ApeRemote
› Step 2: While holding down flashlight button, insert battery
into ApeRemote (if done correctly, group 1 and group 4 will
flash on remote).
To Next Page
Loading...