the unit will scroll thru the different options of each mode. If a
light fixture is in set-up mode with the W-Ape, the screen will
display info for the light fixture rather than the W-Ape.
Group
› Use +/- buttons to select the specific group.
Control Mode
› Sound Master: If the W-Ape is set to Sound Master mode, if
the sound active feature is triggered, it will use the internal
mic built in to the W-Ape to sync the Sound Active feature
among all light fixtures (instead of using the internal mic built
in to each fixture). In this mode, units will be controlled with
ApeRemote, thru the W-Ape. This feature extends the
wireless range on the remote from it's rated 200ft range, to
the W-Ape's rated wireless range of 3,000ft.
› DMX: To use DMX controller, set W-Ape to "DMX" and
connect your DMX controller to W-Ape input with 3-pin
DMX cable.
› W-Ape (Receiver): If multiple W-Apes are being used in one
room, some W-Ape's can be set as a receiver. In this case,
To Next Page
Loading...