Ape Labs ApeStick4 - Operation Guide; Powering On and Off; Fixture Grouping

English
Important: The magnetic feet have to be fixed above the metal
housing. To prevent the ApeStick4 from damage, do not
overtighten the feet.
Operation
Turn On and Off
› Press the button at one end of the ApeStick4 for about one
second. The ApeStick4 turns on and remembers the
previously selected program/brightness.
› To turn the device off, press the button again for about a
second.
The ApeStick4 ignores very short presses of the power button
to prevent unintentional operation.
Assignment of a Group
You can assign ApeStick4s into groups, i.e. to independently
control them in different rooms.
› Immediately after turning the ApeStick4 on, the current
groupsetting of the ApeStick4 flashes on the remote control.
(Factory setting is group 1.)
7