Apeks DST - Service Information

15
PART # DESCRIPTION APPLICATION
111610
MP Test Gauge Medium pressure testing
944022
103102
Brass O-ring
Tool Kit
Plastic O-ring
Tool
Removal and installation of o-rings
109437
Seat InstallationTool
Seat (18) removal/replacement
AT30
Pin Spanner
Removal and installation of Diaphragm Clamp (21) and
Environmental End Cap (26)
100395
Vise Mount Tool Mounting rst stage into bench vise
N/A
(9/16”, 5/8”, 11/16” ) Wrench
Disassembly and assembly
N/A
(5mm, 6mm) Hex Key
Disassembly and assembly
N/A
Torque Wrench
(30-120 in-lbs)
(10-150 ft-lbs)
Apply torque to parts listed in Table 3:
Torque Specications, p. 16
N/A
9/16” Crow Foot
Apply torque to parts listed in Table 3:
Torque Specications, p. 16
N/A
(5mm, 6mm) Hex Key Adapter
Apply torque to parts listed in Table 3:
Torque Specications, p. 16
N/A
3/4” Box Wrench
Apply torque to parts listed in Table 3:
Torque Specications, p. 16
N/A
Magnier with
Illumination
Sealing surface inspection
N/A
Ultrasonic Cleaner Brass and stainless steel parts cleaning
N/A
Christo-Lube
MCG-111
Lubrication
N/A
Powderless Latex Gloves or Finger Cots Keep nger oils off of parts
N/A
Test Bench For Testing
AP0241/AA
First Stage Service Kit Service Parts
TABLE 2: LIST OF TOOLS AND SERVICE KITS
DST First Stage Technical Maintenance Manual