Apera EC400S - Page 19

- 19 -
Figure-12
P4.1 Adjust timing for auto storage
P4.2 Select temp. unit
P4.3 Select lasting time for backlight
P4.4 Select auto power-off time
P4.5 Clear storage
P4.6 Set up auto lock reading mode
P4.7 Adjust date
P4.8 Adjust time
P2.1 Select electrode’s constant
P2.2 Set up calibration reminder
P2.3 Check calibration date
P2.4 Select reference temp.
P2.5 Adjust temp. coefficient
P2.6 Adjust TDS factor
P2.7 Restore to factory default
P1.1 Select pH buffers
P1.2 Set up calibration reminder
P1.3 Check calibration date
P1.4 Select pH calibration mode
P1.5 Restore to factory default
pH Setting Submenu
Main Menu
Basic Parameter Setup Submenu
Conductivity Setting Submenu