⑩ — M+— Data storage; RM— Recall saved data
⑪ — Temperature and reminder icons
⑫ — ATC—Auto Temperature Compensation; MTC— Manual Temperature Compensation
⑬ — Stable reading icon
⑭ — Completed calibration icons
⑮ — Auto-Lock reading mode
⑯ — Low battery reminder. Please replace batteries when this icon is displayed.
⑰ — USB data communication. The meter is connected to your PC when this icon is displayed.
Keypad
3.2.1 Short Press — <1.5 s；Long Press — >1.5 s 。
3.2.2 Power On: Short press to power on: LCD displays the measuring mode used last time (Backlight turned
on for 1 minute).
3.2.3 Power Off: The meter can only be turned off in measuring mode by short pressing
Special Notes: Pressing in calibration mode or parameter setting mode will NOT turn the meter off.
Users need to press first to go back to measuring mode, and then press to power off.
Table- 1 Keypad Operation and Functions
To Next Page
Loading...
