Apogee Element 24 User Manual

Apogee Element Series User’s Guide
Apogee Control iOS App
Many of the features and settings of the Apogee Element Thunderbolt interface can be controlled by the free Apogee Control
iOS app. Here’s how it works:
1. Open the App Store app on your iPad, iPhone, or iPod Touch and search for
Apogee Control.
2. Download and open the Apogee Control app and the “Connect to Device” screen
will appear.
3. Your Apogee Element interface will appear
in the “Available Interfaces” list if:
● Your iOS device is connected to the same
WiFi network as your Mac
● The Element Driver Software has been
installed on this Mac computer
● The Element Interface is powered on and
connected to your Mac computer
5. Select your Element Interface from the list of
Available Interfaces
6. A message will appear on your Mac: Click Allow.
7. The main Control screen will appear. It is separated into three sections:
● Toolbar
● Analog Input settings
● Monitor Output settings
iPhone
iPad
18

Apogee Element 24 Specifications

General

Type	Thunderbolt Audio Interface
Computer Connectivity	Thunderbolt
Form Factor	Desktop
Channels	24
Bit Depth	24-bit
A/D Resolution	24-bit
Analog Inputs	2 x XLR-1/4" combo (mic/line)
Digital Inputs	1 x Optical Toslink (ADAT/SMUX)
Digital Outputs	1 x Optical Toslink (ADAT/SMUX)
Headphones	1 x 1/4"
Sample Rate	192 kHz
Software Compatibility	macOS
Analog Outputs	2 x 1/4" TRS (Main Out)