Revision 5 - 46 - November 2017
Level Glide™ Transfer
System Installation
Attention: Make sure carrier is
securely attached and aligned with tub.
Carrier latching pin and rail alignment
must be adjusted before use.
Tub must be level to align carrier.
1. Open tub door.
2. Place carrier in front of door.
Note: Carrier rails must be in-line and
aligned with tub rails.
Attention: Push gently. Do not force
latching pin into pin receiver. If pin will
not latch, proceed to Check and Adjust
Latching Pin.
To Next Page
Loading...
