Need help?Do you have a question about the Apollo Advantage 6000 Series and is the answer not in the manual?
Introduction to the Apollo Bathing System, its purpose, and benefits.
Environmental parameters for transporting and storing the bathing system.
Environmental parameters for operating the bathing system.
Essential safety guidelines for operating the bathing system and transferring residents.
Steps to take in a life-threatening situation to remove a resident from the tub.
Procedures to ensure the bathing system is safe and ready for use before a session.
Procedures and checks for transferring residents into or out of the chair.
Detailed steps for safely transferring a chair and resident into the bathing tub.
Important procedures to follow while the resident is positioned inside the bathing tub.
Detailed steps for safely transferring a chair and resident out of the bathing tub.
Procedures for cleaning and disinfecting the Remedy® UV system.
Guidelines for cleaning and disinfecting the bathing system with or without UV protection.
Cleaning and disinfecting protocols when the Remedy UV system is active.
Cleaning and disinfecting protocols when the Remedy UV system is inactive.
Overview and functions of the Whirlpool system's control panel.
Description of the Rapid Fill Reservoir control panel, if applicable.
Procedure for setting the correct water temperature for bathing.
Instructions for filling the tub using the manual valve.
How to use the shower wand for bathing.
Steps to operate the whirlpool feature of the bathing system.
Procedure for draining the bathing system.
Steps for filling the tub using the Rapid Fill Reservoir.
Instructions for filling the tub from the Rapid Fill Reservoir.
Procedure for draining the Rapid Fill Reservoir.
Overview and functions of the Air Spa system's control panel.
Description of the Rapid Fill Reservoir panel for the Air Spa system.
Procedure for setting the correct water temperature for bathing.
Instructions for filling the tub using the manual valve.
How to use the shower wand for bathing.
Steps to operate the Air Spa feature, including blower speed and modes.
Procedure for draining the bathing system.
Steps for filling the tub using the Rapid Fill Reservoir.
Instructions for filling the tub from the Rapid Fill Reservoir.
Procedure for draining the Rapid Fill Reservoir.
Introduction to the Level Glide Transfer System and its safety importance.
Instructions for installing or replacing UV lamps and quartz tubes.
Steps to set the maximum safe water temperature for the mixing valve.
Scheduled maintenance for the Level Glide Transfer System.
Scheduled maintenance and calibration for the digital scale.
To Next Page
General