Apollo Advantage 6000 Series - Level Glide Transfer System Maintenance; Scale Maintenance and Calibration

Revision 5 - 61 - November 2017
LEVEL GUIDE™ TRANSFER SYSTEM
Description
Monthly
3 Mos
6 Mos
1 Yr
Notes / Comments
Docking Pin Secures
to Receiver
X
Refer to Level Guide™ Transfer
System Installation on page 46.
Primary Lock
Assembly (carrier)
X
Inspect for debris accumulation; verify
lock works freely.
Secondary Locks
(carrier)
X
Verify locks work freely.
Carrier Rail
Alignment
X
Refer to Level Guide™ Transfer
System Installation on page 46.
Docking Pin Release
Lever
X
Works freely, disengages properly.
Chair Safety Strap
X
Inspect for wear and ensure clips work
correctly.
Caster Locks
(carrier)
X
Casters are tight and work properly.
Heel Protector
X
Verify hardware is tight.
Seat Belts
X
Inspect for wear.
Chair Wheels (under
seat)
X
Inspect by removing seat (lift from
back), check tightness.
Rail Stops (Lock-in
Chair Only)
X
Check tightness.
Self-Locking Lever
Assembly (Lock-in
Chair Only)
X
Lever should engage Stop Lock but
avoid contact with the tub.
SCALE
Description
Monthly
3 Mos
6 Mos
1 Yr
Notes / Comments
Scale Load Cell
Fasteners
X
Ensure load cell cover fasteners are
tight (no play).
Scale Calibration
X
Refer to Scale Calibration sheet.