What to do if Apollo Security Sensors show Error Code E-09?
To resolve error code E-09 on your Apollo Security Sensors, ensure the reflector is uncovered when ‘SET’ is selected, and verify a clear line of sight from the detector to the reflector within a 0.5m radius. Also, confirm that the correct distance has been selected and the appropriate reflectors are in use. If problems persist, realign the detector.
What should I do if my Apollo Security Sensors display Error Code E-11?
To resolve error code E-11 on your Apollo Security Sensors, ensure a clear line of sight from the detector to the reflector within a 0.5m radius. Also, confirm that the correct distance has been selected and the appropriate reflectors are in use. If problems persist, realign the detector.
How to fix Apollo Security Sensors Error Code E-07?
To address error code E-07 with your Apollo Security Sensors, first ensure there is a clear line of sight from the detector to the reflector. Also, make sure that there is no strong light shining on the detector.
How do I fix Error Code E-08 on Apollo Security Sensors?
To fix error code E-08 on your Apollo Security Sensors, realign the detector using Auto-Align.
What is the solution for Error Code E-05 on Apollo Security Sensors?
To resolve error code E-05 on your Apollo Security Sensors, follow the alignment procedure.
What to do for Apollo Security Sensors Error Code E-03?
To troubleshoot error code E-03 on your Apollo Security Sensors, clean and realign the system.
How to troubleshoot Error Code E-12 on Apollo Security Sensors?
To resolve error code E-12 on your Apollo Security Sensors, ensure the reflector was completely covered with a non-reflective material and realign the detector using Auto-Align.
How to fix Apollo Security Sensors Error Code E-01?
To resolve error code E-01 on your Apollo Security Sensors, check the wiring between the system controller and the detector, ensuring the voltage to the detector is between 11 and 13V.
What is the solution for Apollo Security Sensors Error Code E-02?
To resolve error code E-02 on your Apollo Security Sensors, follow the ‘Find’ process and align if necessary.
What should I do if my Apollo Security Sensors show Error Code E-13?
To resolve error code E-13 on your Apollo Security Sensors, ensure the reflector was uncovered when ‘S-01’ was selected.
General| Brand | Apollo |
|---|---|
| Model | SA7100-100APO |
| Category | Security Sensors |
| Language | English |
To Next Page
