EasyManua.ls Logo

Apple Xserve - Ethernet Specifications; FireWire Specifications

Apple Xserve
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
80 Appendix A
Operating environment
m Operating temperature: 10° to 35° C (50° to 95° F)
m Storage temperature: –40° to 47° C (–40° to 116.6° F)
m Relative humidity: 5% to 95% (noncondensing)
m Altitude: 0 to 3048 meters (0 to 10,000 feet)
Optical Drive Specifications
m Disk dimensions supported: 12 cm (4.7 in.)
Ethernet Specifications
m IEEE 802.3 compliant
m Maximum cable length: 100 meters (m)
m Connectors: RJ-45 for 10Base-T, 100Base-TX, and 1000Base-T
m Media, 10Base-T: Category 3 or higher UTP on 2 pairs up to 100 m
m Media, 100Base-TX: Category 5 UTP on 2 pairs up to 100 m
m Media, 1000Base-T: Category 5 and 6 UTP on 4 pairs up to 100 m
m Channel speeds: IEEE Auto Negotiation of 10Base-T, 100Base-TX, and 1000Base-T
FireWire Specifications
m Data transfer speed: 100, 200, up to 400, and up to 800 megabits per second (800 Mbps
available only on back-panel FireWire ports)
m FireWire 400 port (front panel) and two FireWire 800 ports (back panel)
Note: The FireWire 800 ports on your Xserve system transfer data from 800 Mbps devices
much faster than was possible before. These ports have 9-pin connectors, and are
compatible with original FireWire devices with 6-pin or 4-pin connectors.
With an appropriate cable, the new 9-pin ports work seamlessly with all FireWire devices.
Cables are available for connecting a 9-pin port to 4-pin, 6-pin, and 9-pin devices.
m Cables with the three types of FireWire connectors
FireWire 400 (6-pin) FireWire 400 (4-pin) FireWire 800 (9-pin)

Table of Contents

Other manuals for Apple Xserve

Related product manuals