Apple Xserve - USB Specifications; Power Supply

Specifications 81
USB Specifications
m Support for USB 1.1
m Two external Universal Serial Bus (USB) Type A ports
m Separate 12 megabit per second (Mbps) USB channel for each port
m 500 milliamperes (mA) at 5 V available per port for a total of 1 ampere (A)
Serial Port Specifications
m 9-pin D connector
m Pin signals
1: Received line signal detector (RLSD)
2: Received data (RD)
3: Transmitted data (TD)
4: DTE ready (DRT CD)
5: Signal ground (SGND)
6: DCE ready (DCR CC)
7: Request to send (RTS)
8: Clear to send (CTS)
9: Ring indicator (RI)
PCI Video Card Specifications
m Standard VGA connection
m 32 MB of video memory
m Support for 33 and 66 MHz operation
m Support for startup without a monitor connected
Power Supply
AC line input
m Line voltage/current: 100–240 V alternating current (AC), 6 A maximum, single phase,
set automatically
m Frequency: 50–60 hertz (Hz)
1234
6789
5