EasyManua.ls Logo

Appro LC-7516 - Placing a Desiccant Pack Inside the Camera

Default Icon
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
3.2 Placing a Desiccant Pack Inside the Camera
The outdoor mini-dome/ bullet camera comes with a desiccant pack which is placed inside the
camera using a two-sided adhesive tape. The desiccant pack is for reducing the moisture and
humidity content inside the camera and prevents moisture from condensing on the lens or its cover.
If the user decides to remove the camera cover after more than a few months of camera use,
remove the used desiccant pack as well and place the replacement pack inside the camera.
1. Stick the piece of desiccant pack to the inner side of the camera.
2. Then use a two-sided adhesive tape to fix the desiccant pack.
3. Reattach the cover of the camera.
The Outdoor Mini-dome Camera:
The Bullet Camera: