APRILIA RSV4 FACTORY-R - 10-2010 User Manual

APRILIA WOULD LIKE TO THANK YOU
for choosing one of its products. We have drawn up this booklet to provide a comprehensive overview of your vehicle's quality features. Please read it
carefully before riding the vehicle for the first time. It contains information, tips and precautions for using your vehicle. It also describes features, details
and devices to assure you that you have made the right choice. We believe that if you follow our suggestions, you will soon get to know your new vehicle
well and will use it for a long time at full satisfaction. This booklet is an integral part of the vehicle, and should the vehicle be sold, it must be transferred
to the new owner.
APRILIA WIL U BEDANKEN
omdat u één van haar producten heeft gekozen. Wij hebben deze handleiding opgesteld opdat u de kwaliteiten ervan ten volle kan waarderen. Wij
raden aan om deze handleiding geheel door te lezen, voordat u met het voertuig gaat rijden. Het bevat informatie, raadgevingen en waarschuwingen
in verband met het gebruik van uw voertuig; daarnaast zal u eigenschappen, bijzonderheden en handigheidjes ontdekken die u ervan zullen overtuigen
dat u een juiste keuze heeft gemaakt. Wij zijn er zeker van dat indien u hier rekening mee zal houden, u makkelijk zal wennen aan uw nieuw voertuig,
waar u lang naar volle tevredenheid gebruik van zal kunnen maken. Deze uitgave is een integrerend deel van het voertuig, en bij verkoop van dit laatste
moet het worden overhandigd aan de nieuwe eigenaar.
RSV4 Factory - R
Ed. 10 2010

APRILIA RSV4 FACTORY-R - 10-2010 Specifications

General

Year	2010
Manufacturer	APRILIA
Model	RSV4 FACTORY-R
Bore x Stroke	78 x 52.3 mm
Compression Ratio	13:1
Final Drive	Chain
Displacement	999.6 cc
Lubrication	Wet sump
Power	180 HP (132.4 kW)
Power RPM	12500
Torque	115 Nm
Torque RPM	10000
Transmission	6-speed
Clutch	Multi-plate wet clutch with slipper system
Front Suspension	Öhlins upside-down fork, 43 mm stanchions. Adjustable compression and rebound damping and spring preload
Rear Suspension	Öhlins monoshock with piggy-back, adjustable compression and rebound damping and spring preload
Front Brake	2 x 320 mm discs, Brembo radial 4-piston calipers
Rear Brake	220 mm disc, 2-piston caliper
Front Tire	120/70 ZR17
Rear Tire	190/55 ZR17
Dry Weight	179 kg
Seat Height	845 mm
Fuel Capacity	17 liters (4.5 gallons)
Ignition	Digital electronic ignition, integrated with the injection system

Summary

General rules

Foreword and Safety Precautions

Introduction, maintenance notes, and warnings about carbon monoxide.

Fuel and Coolant Safety

Guidelines for safe fuel handling and coolant precautions.

Component Handling and Safety

Precautions for handling used oil, brake fluid, battery electrolyte, and stand use.

Defect Reporting and System a-PRC

Procedures for reporting defects and overview of the a-PRC system.

Vehicle

Main Components Layout

Diagram and list of major motorcycle components and their locations.

Dashboard and Instrumentation

Details on the instrument panel, displays, and warning lights.

Vehicle Controls and Switches

Guide to operating controls like buttons, switches, and levers.

Ignition, Steering Lock, and Immobilizer

Instructions for ignition switch, steering lock, and the vehicle's immobilizer system.

Fairings, Saddle, and Kit Equipment

Procedures for fairings, saddle access, and included tools.

Vehicle Identification

Information on locating and recording chassis and engine numbers.

Use

Pre-Ride Checks

Essential checks before riding: brakes, throttle, fluids, tires, and controls.

Refuelling Procedures

Instructions for safely filling the fuel tank, including capacity details.

Suspension Adjustment

Guide to adjusting rear and front suspension settings for optimal handling.

Riding Techniques and Safety

Guidance on engine run-in, starting, riding, stopping, parking, and basic safety rules.

Tyre Care and Specifications

Information on tyre pressure, wear, replacement, and recommended models.

Brake System Checks

Procedures for checking and maintaining front and rear brake systems and fluid levels.

Battery and Fuse Management

Steps for battery removal, installation, charging, and fuse checks.

Lighting System Adjustment

Instructions for adjusting headlight aim and replacing bulbs for indicators and lights.

Vehicle Cleaning and Storage

Guidelines for cleaning the motorcycle and preparing it for periods of inactivity.

Drive Chain Maintenance

Procedures for checking, cleaning, lubricating, and adjusting the drive chain.

Maintenance

Engine Oil Maintenance

Checking and topping up engine oil levels, including correct oil type.

Coolant System Maintenance

Checking and topping up coolant levels, and general cooling system care.

Brake System Maintenance

Procedures for checking and topping up brake fluid levels.

Battery and Fuse Management

Steps for battery removal, installation, charging, and fuse checks.

Lighting System Maintenance

Instructions for replacing bulbs and adjusting lights.

Vehicle Cleaning

Guidelines for safely cleaning the motorcycle.

Drive Chain Maintenance

Procedures for cleaning and lubricating the drive chain.

Technical data

Vehicle Dimensions and Weights

Specifications for vehicle dimensions, weight, and load capacity.

Engine and Gearbox Specifications

Technical details on engine type, capacity, bore/stroke, compression, and gear ratios.

Suspension and Brake Specifications

Details on front fork, rear shock absorber, and brake system components.

Tyre Specifications

Information on recommended tyre models, sizes, and inflation pressures.

Electrical System and Bulbs

Specifications for electrical components, fuses, and bulbs.

Kit Equipment and Tools

List of tools supplied with the vehicle for maintenance and basic operations.

Programmed maintenance

Scheduled Maintenance Overview

Importance of regular maintenance and Aprilia's service offerings.

Routine Maintenance Schedule

Table detailing inspection, cleaning, adjustment, and replacement tasks at various mileage intervals.

Recommended Products

List of recommended oils, greases, coolants, and fluids for maintenance.