EasyManuals Logo

APRILIA RSV4 FACTORY-R - 10-2010 User Manual

APRILIA RSV4 FACTORY-R - 10-2010
213 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
IN DIT GEVAL MOET EEN Officiële
Aprilia Dealer GECONTACTEERD
WORDEN.
04_06
04_07
Battery removal (04_06,
04_07)
Make sure that the ignition
switch is set to "OFF".
Remove the rider saddle.
Unscrew and remove the two
screws (1) using the spanner
supplied in the tool kit.
Remove the secondary fuse box
(2).
Remove the battery retainer (3).
Undo and remove the screw (4)
of the negative terminal (-).
Move the negative lead (5)
aside.
Move the rubber cap that pro-
tects the positive clamp (+).
Undo and remove the screw (6)
of the positive terminal (+).
Move the positive lead (7) aside.
PAY MAXIMUM ATTENTION AND
PREVENT ALL CONTACT BETWEEN
THE BATTERY POLES AND ANY MET-
Verwijdering van de accu
(04_06, 04_07)
Controleer of de ontstekings-
schakelaar zich in positie ''OFF''
bevindt.
Verwijder het zadel van de be-
stuurder.
Draai de twee bouten (1) los met
behulp van de sleutel die zich in
de gereedschapskit bevindt, en
verwijder ze.
De doos met secundaire zeke-
ringen (2) uitnemen.
De accublokkering (3) verwijde-
ren.
Draai de bout (4) los en verwij-
der ze van de negatieve klem
(-).
Verplaats de negatieve kabel (5)
zijdelings.
Verplaats het rubberen be-
schermingskapje van de positie-
ve klem (+).
Draai de bout (6) los en verwij-
der ze van de positieve klem (+).
Verplaats de positieve kabel (7)
zijdelings.
152
4 Maintenance / 4 Onderhoud

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the APRILIA RSV4 FACTORY-R - 10-2010 and is the answer not in the manual?

APRILIA RSV4 FACTORY-R - 10-2010 Specifications

General IconGeneral
BrandAPRILIA
ModelRSV4 FACTORY-R - 10-2010
CategoryMotorcycle
LanguageEnglish

Related product manuals