APS APS-1000 Series - Page 13

CHAPTER 1
INTRODUCTION
Entire Contents Copyright  2004 by Adaptive Power Systems, Inc. (APSI) • All Rights Reserved • No reproduction without written authorization from APSI.
APS-1000 Series 1 - 7 OM-001-01000-000-04.0
Input Voltage Requirement and Selection
APS-1000 Series Power Converters are delivered with a universal input transformer.
You will receive your unit factory-connected and tested at the voltage specified at the
time of order. Please check the unit data plate to verify the voltage is correct.
Operating Environment
APS-1000 Series Power Converters are designed to operate reliably over a wide range
of environmental conditions. Please operate within the following limits:
 Temperature: 0 °C – 40 °C (32 °F – 104 °F)
 Humidity: 20% – 80% (Non-condensing)
 Altitude: Below 2,000 meters (6,500 feet) of elevation