APS APS-1000 Series - Chapter 1 Introduction; Overview

CHAPTER 1
INTRODUCTION
Entire Contents Copyright  2004 by Adaptive Power Systems, Inc. (APSI) • All Rights Reserved • No reproduction without written authorization from APSI.
APS-1000 Series 1 - 1 OM-001-01000-000-04.0
Chapter 1
Introduction
Overview
Chapter 1 contains important information you should read BEFORE attempting to
install and power-up your APS-1000 Series Power Converter. The information in this
chapter is provided for use by experienced operators. Experienced operators
understand the necessity of becoming familiar with, and then observing, life-critical
safety and installation issues. Topics in this chapter include:
 Safety Notices
 Warnings
 Cautions
 Preparation for Installation
 Installation Instructions
 Transportation
 Storage
Introduction to the APS-1000 Power Converter
APS-1000 Series Power Converters have been designed for long-life trouble-free
operation in the shop-floor testing environment. The input to APS-1000 units is
commercially available power at fixed voltage and frequency. The output from APS-
1000 units is programmable power at user-controlled voltages and frequencies.
There are several operational modes: (1) front panel manual control; (2) manually
programmed test sequences; (3) external control of the manually programmed
instruction test sequences.