1.Important Safety Instructions
1.2 Radio Interference Statement
CE EMC Compliance：The APsystems Microinverter can radiate radio frequency energy. If not installed and used
in accordance with the instructions, it may cause harmful interference to radio communication.
APsystems Microinverter complies with CE EMC regulations, which are designed to provide reasonable protection
against harmful interference in a residential installation.
Nonetheless, if the Microinverter does cause harmful interference to radio or television reception, you are
encouraged to try to correct the interferences by one of more of the following measures:
A) Reorient or relocate the receiving antenna
B) Increase the separation between the Microinverter and the receiver
C) Connect the Microinverter into an outlet on a circuit different from that to which the receiver is connected
If none of the recommendations suggested above bring significant improvement in terms of interferences, please
contact your local APsystems Technical Support.
To Next Page
Loading...
