APsystems DS3 Series - Technical Data

APsystems DS3 series Installation Manual
19
8.1 DS3 series Microinverter Datasheet
Model
DS3-L
DS3
Input Data (DC)
Recommended PV Module Power (STC) Range
255Wp-550Wp+
300Wp-660Wp+
Peak Power Tracking Voltage
32V-55V
Operating Voltage Range
26V-60V
Maximum Input Voltage
60V
Maximum Input Current
18A x 2
20A x 2
Output Data (AC)
Maximum Continuous Output Power
730VA
880VA
Nominal Output Voltage/Range
*
230V/184-253V
Nominal Output Current
3.2A
3.8A
Nominal Output Frequency/ Range
*
50Hz/48Hz-51Hz
Power Factor(Default/Adjustable)
0.99/0.8 leading…0.8 lagging
Maximum Units per 20A Branch
**
6
5
Efficiency
Peak Efficiency
97%
CEC Efficiency
96.5%
Nominal MPPT Efficiency
99.5%
Night Power Consumption
20mW
Mechanical Data
Operating Ambient Temperature Range
-40 °C to +65 °C
Storage Temperature Range
-40 °C to +85 °C
Dimensions (W x H x D)
262mm X 218mm X 41.2mm
Weight
2.6kg
AC Bus Cable
2.5mm
2
Connector Type
MC4
Cooling
Natural Convection - No Fans
Enclosure Environmental Rating
IP67
Features
Communication (Inverter To ECU)
Encrypted ZigBee
Transformer Design
High Frequency Transformers, Galvanically Isolated
Monitoring
Energy Management Analysis (EMA) system
Warranty
10 Years Standard ; 20 Years Optional ***
Compliance
EN 62109-1;EN 62109-2;EN 61000-6-1;EN 61000-6-3;
UNE217002,UNE206007-1,RD647,RD1699,RD413;CEI 0-21;VDE0126-1-1,
VFR2019,UTE C15-712-1,
ERDF-NOI-RES_13E;EN 50549-1;VDE-AR-N 4105
2021/08/30 Rev 2.0
* Nominal voltage/frequency range can be extended beyond nominal if required by the utility.
** Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.
*** To be eligible for the warranty, APsystems microinverters need to be monitored via the EMA portal. Please refer to our warranty T&Cs available on
emea.APsystems.com
Specifications subject to change without notice - please ensure you are
using the most recent update found at https://emea.apsystems.com/resources/library/
© All Rights Reserved