APsystems EZ1 Series - Monitor and Control Microinverters

APsystems Microinverter EZ1 series User manual
11
5.Install and Use AP EasyPower
5.3 Monitor & Control
Figure 8
On this page, user can visualize
- Live Data: The real-time data of the device in current round, including the power, energy, running time,
working status and the cloud status.
 Working status
Normal: The device is working normally.
Alarm: The device has alarms and you need to check it.
 Cloud status
Online: The device is connecting the cloud service through the internet.
Offline: The device is not connecting the cloud service through the internet, maybe the device is not
connected the Wi-Fi or the router is down.
- Benefits Overview: The lifetime energy produced by the device and the equivalent CO2 reduction.
By pressing “ alarm icon ” to check the alarm information if the device status is alarm.
By pressing “ setting icon ” to set the device. The setting page is shown below.
For Connection and monitoring operation mode, please refer to the AP EasyPower User Manual.
Setting Icon
Alarm Icon