User Manual – Electric Vehicle Charging Equipment IC-CPD
7
Version 1.0 / 1906
Version 1.0 / 1906
• Do not perform any modifications or
repair tasks to electrical components
and do not open the device
• Do not touch the contacts on the
vehicle charging inlet and the IC-CPD
charging equipment
• Keep sockets, plug connection and
the IC-CPD charging equipment free
of moisture, water, snow, ice and other
liquids. Never immerse in water
• Disconnect the IC-CPD charging
device from the socket during a
thunderstorm
• Do not insert any objects in the
vehicle charging inlet or in the
IC-CPD charging equipment
• Clean the IC-CPD charging
equipment only if the control unit is
completely disconnected from the
power grid and from the vehicle. Use
a dry cloth for cleaning
• The IC-CPD charging equipment
should not be operated by persons
under the influence of drugs, alcohol
or medications
• The IC-CPD charging equipment
should not be operated by persons
who are not familiar with its use or
who have not read the User Manual
• Keep the IC-CPD charging equipment
away from persons with disabilities
and children who cannot assess the
hazards involved with its handling
• While performing an unattended
charging process unauthorized
persons (e.g. playing children) should
not have access to the IC-CPD
charging equipment
In order to determine whether the
vehicle is equipped with a charging
inlet, please refer to the vehicle manual.
Components of the IC-CPD charging
equipment can cause sparks and ignite
flammable or explosive vapors.
• During charging ensure that the
control box is located at least 20
inches (50 cm) above ground
to reduce the risk of explosions,
particularly in garages
• Do not use the charging and control
device in potentially explosive
ambients
• This device is intended only for
charging vehicles, which do not
require ventilation during the
charging process
4. Safety instructions
WARNING
Explosion or fire hazards
To Next Page
Loading...
Need help?
General