Aptiv IC-CPD - Technical Specifications; Electrical and Physical Characteristics; Operating Environment and Compliance Standards

User Manual – Electric Vehicle Charging Equipment IC-CPD
20
Version 1.0 / 1906
max. 3.6 kW
(depending on model and version)
max. 16 A
(depending on the model variant)
1-phase: 100 - 240 V ~
(depending on the model variant)
50 Hz - 60 Hz
II
< 10 kA rms
Type A
II
IP67 (ICCB)
Page 12
Available power plugs for
industrial sockets
Available power plugs for
domestic sockets
Page 11
Available vehicle charging inlets
and vehicle connectors
19. Specifications
Power:
Rated current:
Rated voltage:
Grid frequency:
Overvoltage category:
Rated short-time withstand current:
Residual current device:
Protection class:
IP protection class:
Variants of the power plug:
Variants of the vehicle charging
inlets and vehicle connectors:
Electrical specification
This IC-CPD charging equipment
meets all applicable IEC and EN
standards and regulations in the
context of national legislation, as
well as the European and inter-
national regulations. If necessary,
the respective declaration of
conformity can be made available
• 2014/35/EU, 2014/30/EU
• 2011/65/EU
Dimensions of the IC-CPD charger:
Weight of the IC-CPD charger:
Operating temperature:
Storage temperature:
Humidity:
Altitude:
Directives of the European Union:
Standards:
Approx. 3.74 in. x 8.66 in. x 2.32 in.
(95 mm x 220 mm x 59 mm) (wxhxd)
Approx. 5.18 lbs. (2.35 kg)
Dimensions and weight
Environmental conditions
Guidelines and standards
-22 °F to +122 °F (-30 °C to +50 °C)
-40 °F to +158 °F (-40 °C to +70 °C)
Up to 95%, non-condensing
max. 16,404 ft (5,000 m)
above sea level