User Manual – Electric Vehicle Charging Equipment IC-CPD
15
Version 1.0 / 1906
Version 1.0 / 1906
4. Wait until the Power LED lights up
continuously
5. Insert the vehicle connector
into the vehicle‘s charging inlet
6. The charging process begins auto-
matically
7. To interrupt the charging process,
unlock the vehicle charging inlet
and remove the vehicle connector
11. Operation
For the operation of your IC-CPD
charging equipment, observe the
following instructions:
1. Read fully and understand the vehicle
manual and the instructions for the
IC-CPD charging equipment
Completely uncoil the cable of the
IC-CPD charging equipment
2. Ensure that the cables are
routed correctly over their
entire length, in order to
avoid stumbling
3. Insert the power plug into the socket
8. Remove the power plug from the
socket
9. Keep the IC-CPD charging
equipment in a safe place
POWER
POWER
CHARGING
To Next Page
Loading...