Note: Please kindly read this operation manual
Thank you for purchasing our products, to continuously improve quality and enhance
the function of the analyzer, the company reserves the right to modify the content
and display of icons at any time, the actual display and operation manual may have
differences, so the actual situation of the machine as the subject. In the use of this
analyzer, please follow the functions described in the operating manual and the
installation method, the company is not responsible for any loss or damage caused
by improper use of any person or entity. If you have any questions or find that the
operating manual is missing or wrong, please contact the company's business
personnel.
Safety and precautions
1. Please read this manual before installing, avoid the wrong records cause security
problems and equipment damage.
2. Please avoid high temperature, high humidity, corrosive environment to install the
transmitter, and avoid direct sunlight.
3. Electrode signal transmission line must use a special coaxial wire, the proposed
use of the company provided by the coaxial line, can’t use the general wire instead.
4. The use of power, should avoid power interference, especially in the use of
three-phase power, we should use ground (if there is a power surge interference
phenomenon occurs, the power supply and control device of the transmitter such as:
dosing machine, mixer and other separate power transmitter with a separate power
source, or coil of the electromagnetic switch and all the power control device
connected with the surge absorber to eliminate the surge).
5. The transmitter output contact bearing alarm and control function. Based on
safety and protection reasons, please be sure to carry out external resistance enough
current value relay to carry, in order to protect the safety of the use of the
instrument.
To Next Page
Loading...
Need help?
General