Apure RP-3000 - Communication Setting Mode

6.11 Communication setting mode
In the setting interface, press
DownDownDown
or
UpUp
key to adjust to the
communication option, press
EnterEnter
key to enter the setting menu.
In the confirmation interface, press
DownDownDown
or
UpUp
key to adjust to
select the communication address and baud rate, press
EnterEnter
key for
final confirmation. Specific process as shown below:
Note: the communication address range is 1-255, the baud rate has 4 stalls
(4800, 9600, 19200, 38400), MODBUS RUT protocol is shown in schedule
1.