EasyManua.ls Logo

Apure RP-3000 - 二. Combination and Installation; Host Fixed; Cabinet Installation Reference Drawing

Apure RP-3000
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Control
Contact
output
RELAY ON/OFF contact, 240VAC 0.5A Max
Setting HI/LO Two independent control points
Cleaning settings
Contact output, ON 09999 seconds/OFF 0999.9 hours
Voltage output
DC±12 V
Protection level IP65
Power supply
100 V240 VAC±10, 50/60 Hz
Installation
method
Wall mounted/Pipeline type/Panel
Dimension 144 mm×144 mm×115 mm (H×W×D)
Cut off
dimension
138 mm×138 mm (H×W)
Weight 0.8 Kg
二. Combination and installation
2.1 Host fixed
The transmitter can be wall mounted or panel installation
2.2 Cabinet installation reference drawing
Note:
The surface of the installation, please first set aside 138mm*138mm square
hole in the distribution box panel, the transmitter from the distribution box
panel directly into, the transmitter attached to the fixed by the rear cover,
card into the fixed slot.