Apure RP-3000 - Temperature Setting Mode

6.6 Temperature setting mode
In the setup interface, press
DownDownDown
or
UpUp
key to adjust to
temperature setting options. Press
EnterEnter
key to enter the setting menu.
The system displays the MTC and ATC display interfaces depending on the
selected temperature compensation mode.
In the interface, press
DownDownDown
or
UpUp
adjust the corresponding
temperature setting options, then press
EnterEnter
key to enter the setting
menu. In the corresponding settings interface, press
DownDownDown
or
UpUp
key to adjust the temperature settings, and press
EnterEnter
key to
complete the settings. Specific process as shown below: