Aputure Light Storm LS 600d - Effects Control

-15-
2.13) Effects
* In the Lightning Effect, short press the Effects button to trigger the effect. Long press
the Effects button for 2 seconds to activate cycle mode for the lightning effect.
a. Paparazzi Effect b. Fireworks Effect
c. Faulty Bulb Effect d. Lightning Effect
2.12) Factory Reset
Press the MENU button to enter the menu interface,rotate the INT wheel to select and
press to enter the Factory Reset interface.
The factory settings are: fan is in smart mode, light brightness value is 50%, studio mode
off, dimming curve-linear, DMX channel number 001，English, fireworks light effect
frequency 5.
Press and hold press the EFFECTS button 2s to enter Effect mode.
In the Effect mode,short press EFFECTS button to select the desired lighting effect.