Aqua Lung CORE - Recommended Cleaners and Lubricants

Service Manual Core 1
st
stage
Service Manual Core 1
st
stage
Rev. 05/2015 19
Table 3. Recommended cleaners and lubricants
LUBRICIANT / CLEANER
APPLICATION
SOURCE
Christo-Lube MCG 111
All O-rings
Aqua Lung, ref. 480025
Oakite #31
Acid bath for cleaning brass and stainless
steel parts
Oakite Products, Inc.
NETALU
Acid bath for cleaning brass and stainless
steel parts
Aqua Lung, ref. 455001
Diluted white vinegar
Acid bath for cleaning brass and stainless
steel parts
Household stores
Washing-up liquid (diluted with hot water)
Degreases brass and stainless steel parts;
general cleaning of plastic and rubber
parts
Household stores
Disinfectant STERANIOS 2%
Disinfectant for all plastic and metal parts
Aqua Lung, ref : 382062
ATTENTION: Silicone parts do not require lubrication. Do not grease them. Greasing
silicone parts can change their molecular construction and cause premature
degradation of the material.
ATTENTION: Do not use hydrochloric acid for cleaning parts. Hydrochloric acid, even
when well diluted, attacks the coating of metal parts and leaves a corrosive deposit that
damages plastic parts and O-rings.