Need help?Do you have a question about the Aqua Lung CORE and is the answer not in the manual?
Guidance for correctly performing procedures, workshop requirements, and handling parts.
Defines actions like unscrewing/screwing and explains acronyms used in the manual.
Steps for safely disassembling the yoke connection of the regulator.
Steps for safely disassembling the DIN connection of the regulator.
Steps for safely disassembling the wet chamber component of the regulator.
Steps for safely disassembling the dry chamber component of the regulator.
Common disassembly steps applicable to all regulator models.
Common reassembly steps applicable to all regulator models.
Steps for correctly reassembling the yoke connection of the regulator.
Steps for correctly reassembling the DIN connection of the regulator.
Steps for correctly reassembling the wet chamber component of the regulator.
Steps for correctly reassembling the dry chamber component of the regulator.
Guide for diagnosing and resolving common regulator issues.
List of tools and service kits required for regulator maintenance.
List of recommended cleaners and lubricants for regulator parts.
Table detailing the correct torque values for various regulator components.
Specifications for checking regulator performance and pressure settings.
Detailed procedure for cleaning and lubricating regulator components.
General| Type | Regulator |
|---|---|
| Number of HP Ports | 1 |
| Number of LP Ports | 4 |
| Venturi Adjustment | Yes |
| Cold Water Suitable | Yes |
| Nitrox Compatibility | Yes |
| Maximum Working Pressure | 232 bar |
To Next Page